|
|
|
|
 |
|
|
|
A4000 Series Universal Controller |
View
Large
|
The ABUS A4000 series Universal Controller is a Microprocessor based Digital Process Controller, which can be applied to high-precision measurement and control of temperature, pressure, discharge, liquid level and humidity etc... A four-digit LCD dual display indicates measured value and set-value for all programming parameters.
Instrument configuration is achieved from the front panel keyboard, without any hardware change. The user should read this manual thoroughly before using the instrument. It must be handled with care and should be used accordingly for best results. |
 |
| Setting Mode | : | | | A | : | Panel Setting. | | B | : | External Setting. | | C | : | Programmable Curve Setting (Ramp & Soak). | | Control Mode | : | PID Control,
Preset Curve Control,
Pulse width control,
Direct Electronic Machine Control. | | Display Range | : | -1999 ~ 9999. | | Analogue Output | : | 4 ~ 20mA,
0 ~ 20mA. | | Resolution | : | One loop analogue or control output: 12 digits. | | Power Supply | : | 85 ~ 265V AC/DC. | | Consumption | : | < 5VA. | | Ambient Temperature | : | 0 ~ 50 °C. | | Relay Contact Switch Output | : | 250V / 3A,
30V DC / 3A. | | SSR Pulse Voltage Output | : | 24V DC / 30mA. | | SCR Contact Output | : | Can contact 5 ~ 500A SSR. | | Sampling Rate | : | < 0.5 seconds | | Communication | : | RS485 (optional) | | Dimensions | : | 48mm(W) x 48mm(H) x 100mm(L). |
|
 |
 [A4000_Universal_Controller.pdf]
|
|
|
|
|
|
