|
|
|
|
 |
|
|
|
PT-FD Series Pressure Transmitter |
View
Large
|
The ABUS PT-FD series of transmitters features, a flush diaphragm process connection. They are specifically designed for the measurement of viscous fluids or media containing solids that may clog a process connection. Flush diaphragm pressure transmitters are available in pressure ranges as low as 1500INWC.
The flush diaphragm could be easily flushed or cleaned to remove dirt. The model offers reliable and accurate pressure measurement of the gases, viscous liquids and slurries. And for the electrical parts adopt high performance chips, and deal with special amplified chip, integrated configuration, and smart profile. A wide range of electrical connection and process connection options are available to meet almost any requirement. |
 |
| Ranges | : | -1 ~ 0 Bar
0 ~ 600 Bar | | Accuracy | : | ± 0.25% FS (BFSL),
± 0.5% FS (Limit point Calibration). | | Maximum Pressure | : | 1.5 x F.S. | | Output | : | 0 ~ 5V, 0 ~ 10V,
0 ~ 20mA, 4 ~ 20mA. | | Adjustable Zero/Span | : | ± 10 using potentiometers inside the instrument. | | Power Supply | : | 24V DC (10 ~ 36V DC). | | Electrical Conenctions | : | M12 connector, Five Pin Bendix Connector,
Hirschman Type or Direct Down-Lead. | | Operating Temperature | : | -40 ~ 125°C Higher Ranges on request. | | Ambient Temperature | : | -20 ~ 80°C. | | Process Connection | : | G¼",
M20 x 1.5,
¼" NPT. |
|
 |
 [PTFD_Pressure_Transmitter_Flush_Diaphragm.pdf]
|
|
|
|
|
|
