| Accuracy | : | 0,5 ºC @ 25 ºC (1.6 °C for the entire measurement range) |
| Range | : | Configurable between -50 and 120 °C; |
| Default: 0 to 100 ºC |
| Operating limits | : | TEMP-WM: Electronic circuit: -20 to +65 °C |
| TEMP-DM: Electronic circuit: -20 to +65 °C |
| Sensor and probe: -40 to +100 °C |
| | Note: For temperatures above 65 ºC or below -20 ºC, a maximum of 50% of the probe length (TEMPDM)
should be exposed to this temperature, to avoid conducting extreme temperatures to the electronic |
| Response time | : | Up to 30 seconds in slow moving air |
| Power supply | : | 4-20 mA model: 12 Vdc to 30 Vdc |
| 0-10 V model: 18 to 30 Vdc / 15 mA max. |
| Outputs | : | 4-20 mA or 20-4 mA current, 2-wire loop power supply |
| 0-10 Vdc voltage / 2 mA max. |
| Output Load (RL) | : | 4-20 mA model: RL (Ohms max) = (Vdc – 12) / 0.02 |
| let Vdc = Loop power supply (12 to 30 Vdc) |
| 0-10 V model: 2 mA max. |
| Output resolution | : | 4-20 mA model: 0.006 mA |
| 0-10 V model: 0.003 V |
| Reverse polarity protection | : | Yes |
| Protection | : | Electronic circuit case - IP65; Sensors capsule: IP40 |
| Cable entrance | : | Compress fitting PG7;Sensor, output and power supply are not electrically isolated. |
[TempDM-WM.pdf]