|
|
|
|
 |
|
|
|
UC Series Universal Process Controller |
View
Large
|
The ABUS UC Series Controller, economy, is a Microprocessor based Digital Process Controller, which can be applied in high-precision measurement and control of temperature, pressure, discharge, liquid level and humidity etc...
A four-digit LCD dual display shows measured value and set-value for all programming parameters. Instrument configuration is achieved from the front panel keyboard, without any hardware change. The user should read this manual thoroughly before using the instrument. It must be handled with care and should be used accordingly for best results. |
 |
| Sensor Input | : | Thermocouple: J,E,S & K,
RTD: Cu50, Pt100,
Voltage: 0 ~ 5V, 1 ~ 5V,
Resistance: 0 ~ 20mA, 4 ~ 20mA.
| | Intrinsic Error | : | ± 0.5% F.S.± 1 digit. | | Sampling Period | : | < 0.3 seconds. | | Power Supply | : | 220V 10% / 50~60Hz,
Power Consumption: <5W. | | Output Specifications | : | Relay Contact Switch,
Solid-State Relay,
Single Phase Thyristor zero-crossing trigger signal,
Inverse Parallel Connection or Thyristor Power Module. | | Operating Temperature | : | 0 ~ 50°C. | | Humidity | : | 0 ~ 85% RH. | | Dimensions | : | 48mm x 48mm x 100mm. |
|
 |
 [UC_Series_Controller.pdf]
|
|
|
|
|
|
