|
|
|
|
 |
|
|
|
MG Low Differential Pressure Gauge |
View
Large
|
The magnet-helix type gauges are designed to give fast, accurate indication of differential pressures. The gauge may be served as a readout device when measuring fluids (Air and non-combustible, compatible gases). Guaranteed within 2% of full scale – and for the wide choice of 81 ranges available to precisely suit your needs. A simple,
frictionless movement, which caused by pressure difference, forces the magnetic helix to turn in order to maintain the gap and the pointer fixed to the helix turns accordingly.
It quickly indicates low air or non-corrosive gas pressures – positive, negative or differential. This design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. |
 |
| Service | : | Air and non-combustible gases, compatible gases | | Range | : | Refer Ordering Table in catalouge | | Accuracy | : | ±2% of full span at 21°C (±3% on MG-0.50IN, MG/Z-0.5IN, MG-10MM, MG-100Pa, MG-125Pa and ±4% on MG-0.25IN, MG-6MM,
MG-60Pa ranges) | | Ambient Temperature | : | -7 ~ 60°C | | Pressure Limit | : | -68 ~ 100KPa | | Overpressure | : | Relief plug opens at approximately 25Psig (172KPa) | | Process Connections | : | 1/8″ female NPT duplicate high and low pressure taps: one pair side
and one pair back | | Case and Bezel Material | : | Die cast aluminum | | Weight | : | 460g | | Dial Size | : | 4″ Diameter | | Mounting Position | : | Vertical | Standard
Accessories | : | Two 1/8″ NPT plugs for duplicate pressure taps, two 1/8″ pipe thread
to rubber tubing adapter, and three flush mounting adapters with screws. |
|
 |
 [MG_Low_Differential_Pressure_Gauge.pdf]
|
|
|
|
|
|
