HUMIDITY MEASUREMENT |
Accuracy | : | Refer to figure RHT and Temperature accuracies |
Repeatability | | ±1 % RH; |
Hysteresis | | ±1 % RH; |
Non-linearity | | << 1 % RH; |
Stability | | < 1 %RH / year; |
Span | | Any value between 0 and 100 % RH or –40 and 100 °C for dew
point; |
Response time | | 4 seconds in slow moving air |
TEMPERATURE CHANNEL |
Accuracy | | Refer to figure RHT and Temperature accuracies; |
Repeatability | | ±0.1 °C; |
Span | | Between -40 and 120 °C; |
Response time | | Up to 30 seconds in slow moving air |
GENERAL SPECIFICATIONS |
Power supply | | 12 Vdc to 30 Vdc (4-20 mA model) or 18 to 30 Vdc (0-10 V
model) |
| Outputs | : | 4-20 mA or 20-4 mA current, 2-wire loop power supply, 0-10
Vdc voltage (optional) |
| OUT1 output resolution | : | 0.006 mA (4-20 mA) or 0.003 V (0-10 V); |
| OUT2 output resolution | : | 0.022 mA (4-20 mA) or 0.015 V (0-10 V); |
| Channel isolation | : | The 4-20 mA outputs are isolated from each other. The 0-10 V
outputs share a common ground; |
Output Load (RL) | | 4-20 mA output: RL (Ohms max) = (Vdc – 12) / 0.02
Let Vdc = Loop power supply (12 to 30 Vdc)
0-10 Vdc output: RL (min) = 10 kilo ohms |
Reverse polarity protection | | YES |
Protection | | Electronic circuit case - IP65; Sensors capsule: IP40 |
Cable entrance | | Compress fitting PG7; |
Operating limits | | Sensor e probe (RHT-DM): See Figure 01; |
Electronic circuit | | -10 to +65 °C, 0 to 95 %RH |
[RHT.pdf]