|
|
|
|
 |
|
|
|
Log Box-DA Data Logger |
View
Large
|
The ABUS LogBox-DA is an electronic data logger with two input channels, one analogue and one digital. Input data is stored in the logger internal memory, for later download to a PC for visualization and analysis in the form of tables or graphs. The data is easily exported to spreadsheets.
The LogChart-II is the software used to configure the logger, download and visualize data. The logger configuration allows defining the logger operation mode,
including programming the start/stop time of data acquisition. Other parameters such as signal input type, logging interval, multiplication factor, scale range, etc, are easily selected through the LogChart-II software.
The LogBox-DA also provides a signal for commanding an external power supply (battery) of a device connected to the logger. This feature allows that external devices, such as a transmitter, be powered only during the measurement sample time, thus extending the autonomy of these external batteries. |
 |
| Input | : |
| | Channel 1 | : | NPN, PNP, Pulse or Dry Contact,
Level 0: 0.0 up to 1.0 Volts,
Level 1: 2.0 up to 24.0 Volts,
Max. Frequency: 4000 Hz for NPN, PNP, Pulse 20Hz,
Input Impedance: NPN, PNP and Pulse is 105 kΩ,
Dry Contact: Capacitance of 100 nF,
Max. Counting: 65,535 per period. | | Channel 2 | : | Input Impedance:
0 ~ 20mA and 4 ~ 20mA: 120Ω,
0 ~ 50mV: 10MΩ,
0 ~ 10V DC: 120 KΩ. | | Memory Capacity | : | 32000 (32K) or 64000 (64K). | | Interval between Readings | : | Minimum: 10 seconds,
Maximum: 18 hours. | | External battery switch time | : | 0 to 10 seconds. | | Power | : | 3.6V lithium battery (1/2 AA). | | Estimated Autonomy | : | Over 2000 days (one daily download). | | Working Temperature | : | -40°C ~ 70°C. | | Protection | : | IP65, IP67 and IP68 models (see lateral label on product). | | Material | : | ABS + PC Case, Polycarbonate Film. | | Dimensions | : | 60mm x 70mm x 35mm. |
|
 |
 [LogboxDA_Data_Logging_Acquisitions.pdf]
|
|
|
|
|
|
